© 2021
Order #XXXXX
Locked layer contains
placeholder marks.
Completed Assembly
Post
Mount
Plate
Clamshell
Set
Screw
Base
Bolt
Cord Management for iPad
Attach iPad cord to supplied USB extension
cord. Feed USB cord through top hole of
post, then out bottom hole of post.
Connect to power.
Cord
Access
iPad
Lock
Lock
Clamshell
Steps:
1) Attach base to post, using bolt.
2) Attach mount plate to post, using set screw.
NOTE: Mount plate must rotate left and right,
before installing clamshell.
3) Attach clamshell to mount plate, using acorn nuts.
4) Insert iPad into clamshell, then route cords through
holes in post. See
Cord Management
detail.
5) Attach Z-Plate to post, using bolts.
6) Attach Literature Pockets to back of post.
Foam Lining
Removed
Home Button Shield
Optional Cover for Home Button
1) Remove foam lining from inside bottom of
clamshell.
2) Attach Home Button Shield with double-sided
tape to inside of clamshell, keeping top of
shield flush with clamshell opening.
NOTE: This is a permanent fix and can’t be
easily removed.
Acorn
Nuts
Clamshell
Literature
Pockets
Bolt
Bolt
Z-Plate
Rotate clamshell
to turn iPad from portrait
to landscape orientation.
MOD-1377 Sanitizer / iPad Stand
REV 9/2021
If you would like to tell us about your experience with your setup instructions please email us at
SETUP INSTRUCTIONS
