© 2018
Order #XXXXX
Infill
*
*
Stand
Steps:
1) Slide
Infill
between verticals of stand.
2) Attach horizontal extrusion between stand verticals.
3) Attach base plate to bottom of stand verticals, using bolts.
4) Attach plate to top end of stand, using bolt.
NOTE: Plate must rotate left and right, before installing clamshell.
5) Attach clamshell to plate, using hex nuts.
6) Insert iPad in clamshell and feed cord through holes.
See
Cord Management For iPad
detail.
7) Attach literature holders to stand where desired.
See
Literature Holder
detail.
Attach connector to
literature holder. Connect
literature holder to
vertical extrusion.
Literature Holder
*
Tighten Lock
to Secure
Connector
Vertical Extrusion
Completed Assembly
Side View
Top View
Rotate clamshell
to turn iPad from portrait
to landscape orientation.
Horizontal
Extrusion
Clamshell
Literature
Holders
Base
Plate
Plate
Hex
Nuts
Cord from iPad
USB
Extension
Cord
Cord Management For iPad
Attach iPad cord to supplied USB extension
cord. Feed USB cord through top hole of
post, then out bottom hole of post.
connect to power.
Cord
Access
iPad
Lock
Lock
Clamshell
Foam Lining
Removed
Home Button Shield
Optional Cover for Home Button
1) Remove foam lining from inside bottom of
clamshell.
2) Attach Home Button Shield with double-sided
tape to inside of clamshell, keeping top of
shield flush with clamshell opening.
NOTE: This is a permanent fix and can’t be
easily removed.
SETUP INSTRUCTIONS
If you would like to tell us about your experience with your setup instructions please email us at
SETUP INSTRUCTIONS
If you would like to tell us about your experience with your setup instructions please email us at
MOD-1357 iPad Kiosk
