w w w . c l a s s i c
e x h i b i t s . c o m
866.652.2100
© 2012
WHEN DISASSEMBLING ALUMINUM EXTRUSION, TIGHTEN ALL
SETSCREWS AND LOCKS TO PREVENT LOSS DURING SHIPPING
Order #XXXXX - MOD-1177 - Kiosk Assembly
Item
10
11
12
13
Qty.
1
1
1
1
Steps
1) Attach vertical extrusions [11,13] to base plate [10] with bolt.
2) Insert connection bar into vertical [11] and secure with set
screws.
3) Connect vertical [12] to connection bar inserted into vertical [11]
and secure with set screws.
4) Attach tapered plex wing to front of vertical [13] using screw caps.
5) Attach counter top to vertical extrusion [13].
6) Attach monitor mount to vertical [12] with screws as shown.
7) Attach round sign to vertical [12] with stand-off barrels and screw
caps.
Description
23”D Round Base Plate
40”h Lower Round Vertical Extrusion
40”h Upper Round Vertical Extrusion
36”h Round Vertical Extrusion
10
11
13
Screw
Cap
Secure sign to
stand-off barrels using
screw caps
Sign Attachment
stand off
barrel
Slide stand-off barrels
into groove of vertical
extrusion
12
13
12
11
Sintra Sign
Monitor Mount
Attachment
Attach back plate
to connectors using
screws. Attach top
plate and tighten
setscrews to secure.
Slide connectors
into groove of
extrusion. Tighten
setscrew to secure
in place.
Setscrews
Stand-off
Barrel
Screw
Cap
Screws
Connector
Screws
Vertical Connection
*
*
