w w w . c l a s s i c
e x h i b i t s . c o m
Step 1
866.652.2100
© 2011
WHEN DISASSEMBLING ALUMINUM EXTRUSION, TIGHTEN ALL
SETSCREWS AND LOCKS TO PREVENT LOSS DURING SHIPPING
Order #XXXXX - MOD-1131 -
Pedestal Assembly
Item
1
2
3
4
5
6
7
8
9
Description
38”h Round Vertical Extrusion
38”h Round Vertical Extrusion
38”h Round Vertical Extrusion w/ Hinges
38”h Round Vertical Extrusion w/ Door Stopper
33” Curved Horizontal Extrusion
12” Horizontal Extrusion
9.215” Horizontal Extrusion
12” Horizontal Extrusion
34.418” Vertical Extrusion
Quantity
1
1
1
1
2
2
2
2
1
Steps:
1) Attach lower horizonal extrusions [5, 6, 7 and 8] between vertical extrusions [1, 2, 3 and 4].
2) Attach vertical extrusion [9] to horizontal extrusion [5], leave loose, placing inserts as indicated,
then tighten setscrews to secure vertical in place.
3) Place remaining inserts and door in place.
4) Attach upper horizonal extrusions [5, 6, 7 and 8] between vertical extrusions [1, 2, 3 and 4].
5) Velcro internal shelf supports to inside assembled pedestal
6) Set internal shelf atop shelf supports
7) Set counter top on assembled pedestal.
8) Attach plex shelf to counter top using stand-offs.
1
2
3
4
5
6
7
8
Insert
Insert
Insert
Insert
Door
Plex Shelf
Counter
9
Slide Door into
Place atop Hinge
as shown.
Door Attachment
5
6
7
8
Place counter atop assembled
pedestal base. Attach top
shelf to counter usign stand-offs.
Internal Shelf
NOTE :
PDF copies of your Setup Instructions are available @ classicexhibits.com
See the search tool on the lower left hand corner of the Home page.
Enter the 5 digit Order #.
Search for Setup Instructions
search
