2.0
AMPLIFIER CONTROLS, INDICATORS, AND ALARMS
This section of the manual will give an overview of the available menus in the
GA5100 series amplifier. All instructions in Section 2.0 refer to the representation
of the front panel shown in the diagram below. The user can scroll through the
menus by using the push buttons that are on the front panel and are located in the
right of the LCD screen.
2.1
The operation of the panel
2.1.1 Open menu
A. Plug in 220V city power supply
B. Turn on power switch in the rear panel, then input power and turn
on the laser key in the front panel
Front panel shows “
KEY ON…
”. Laser status lamp turns green from red,
and the machine enters self-checking. After checking, it enters working
status and display “
Descriptor
”.
2.1.2 Start-up main menu
Press
▲
\
▼
button and the following menu will be displayed in
sequence.
Menu # 1 - Descriptor
Read-only menu, tells the model of this equipment
Menu # 2 - S/N
Read-only menu, tells the serial-number
Menu # 3 - INPUT
Read-only menu, tells the input optical power
Menu # 4 - OUTPUT
Read-only menu, tells the output optical power
Menu # 5 - PUMP BIAS1
Read-only menu, tells the current of pump
Menu # 6 - PUMP BIAS2
Read-only menu, tells the current of pump
Page 2 of 7