Vision AV-1900, Product Manual, Page: 2 / 30

2 3
4 Input 2
5 Input 3
6 Input 4
2-Phono / RCA line-level input
Balanced Phoenix Bare-wire
Mic Input
Mic input trim
Balanced Phoenix Bare-wire Mic Input Bluetooth Indicator
Flashing: pairing mode
On: paired
Mic input trim
Bluetooth Antenna
Balanced Phoenix Bare-wire Mic Input
3.5 mm Minijack input
Minijack on front panel overrides
this one
Mic input trim
BT Notes
2 Input selector
3 Input 1
1 Front panel
2 1
3
4 5
9
6
7 8
1. Input 4 Auxiliary input minijack.
Plugging in here will disconnect input
4 on rear.
2. Tone control
3. Input 1 – Mic or Line
4. Input 2 - Mic or Line
5. Input 3 - Mic or Bluetooth [Push: hold
for 3 seconds to unpair BT device]
6. Input 4 - Mic or Line
7. Master volume [Push: Power on/Off]
8. Power indicator
9. Bluetooth indicator -
Flashing: pairing mode / On: paired
Balanced XLR Mic Input
Pin 1 = ground
Pin 2 = +
2-Phono / RCA line-level input
Mic input trim
- Turn up for less sensitive mics
- Turn down for more sensitive mics
Adjust so that front dials are set to
same position for matching volume
levels for each input
Mic Input with Phantom power ON Mic Input with Phantom power OFF
Line Level Input
• To disable set switch to left or centre positions
• AV-1900 has one BT memory slot. It will pair with the
most recently paired device without requiring PIN.
• Resetting BT by holding down Input 3 dial will delete
memory slot to allow new device to connect
• Only one device can pair at the same time
EN
PRODUCT MANUAL AV-1900