Vision AV-1600 Owner'S Manual Download Page 8

AV-1600_manual_en 

WARRANTY 

This product comes with a 2-year return to base warranty, effective from the date of purchase. 

This warranty applies only to the original purchaser and is not transferable. For the avoidance of 

doubt, this will be taken from the information held by the appointed national distributor at the 

point of sale. If the product is DOA (dead on arrival), you have 21 days from purchase date to 

notify the national distributor via your AV reseller. The liability of the manufacturer and its 

appointed service company is limited to the cost of repair and/or replacement of the faulty unit 

under warranty, except for death or injury (EU85/374/EEC). This warranty protects you against 

the following: 

• Failure of any components, including the power supply. 

• Damage when the product is first removed from its packaging if reported within 24 hours of 

purchase. 

If you find you do have a problem with this product, you should contact the AV reseller you 

purchased this product from. The original purchaser is responsible for shipment of the product 

to the manufacturer’s appointed service centre for repair. 

We will endeavour to return repaired units within 5 working days, however this may not always 

be possible, in which case it will be returned as soon as practicably possible. In line with our 

WEEE commitments, the manufacturer endeavours to replace the faulty parts of the product 

rather than replacing the whole unit. This warranty does not protect this product against faults 

caused by abuse, misuse, incorrect installation, unstable or faulty power input, which might be 

caused by ignoring the guidelines set out in this manual. 

 

LEGAL DISCLAIMER: Because we are committed to improving our products, the details above 

may change without prior warning. This User Manual is published without warranty and any 

improvements or changes to the User Manual necessitated by typographical errors, inaccuracies 

of current information, or improvements to programs and/or equipment, may be made at any 

time and without notice. Such changes will be incorporated into new editions of the User 

Manual. 

Summary of Contents for AV-1600









Reviews: