Date of last revision: 9.05
TREADMILL.CALIB.TM181.TC17305.REV1
STEP 1
EnTEr EnginEEring ModE
• With the SAFETY KEY in place, hold the
“ELEVATION UP”
and
“sPEEd
dOwN”
buttons for 5 seconds. The profile window will read
“DGA3J”
and the function window will read
“NONE”
.
• Use the elevation keys until
“ENG1”
is displayed in the function window.
Press
“sELECT”
. You are now in ENGINEERING MODE.
STEP 2
SET MiniMuM SPEEd
• Press the
“ELEVATION dOwN”
button until the function window reads
“P0”
.
“0”
will appear in the elevation window and
“39”
should appear in
the speed window. To adjust, press
“sTART”
.
• Press the
“sPEEd UP”
or
“sPEEd dOwN”
button until the elevation
window reads
“35 - 41”
. The running belt should be moving at .5 MPH.
• Press the
“sELECT”
button to update the data.
STEP 3
SET MaxiMuM SPEEd
• Press the
“ELEVATION UP”
button until the function window reads
“P1”
.
“0”
will appear in the elevation window and
“418”
should appear in the
speed window. To adjust, press
“sTART”
.
• Press the
“sPEEd UP”
or
“sPEEd dOwN”
button until the elevation win-
dow reads
“415 - 425”
. The running belt should be moving at 12 MPH.
• Press the
“sELECT”
button to update the data.
STEP 4
SET ThE half MaxiMuM SPEEd
• Press the
“ELEVATION UP”
button until the function window reads
“P2”
.
“0”
will appear in the elevation window and
“216”
should appear in the
speed window. To adjust, press
“sTART”
.
• Press the
“sPEEd UP”
or
“sPEEd dOwN”
buttons until the console
reads
“210 - 220”
. The running belt should be moving at 6 MPH.
• Press the
“sELECT”
button to update the data.
T9500
(TM181)
Deluxe
(TC17305)
Calibration Guide
CALIBRATION
GUIDES
1
