Getting Started VC Smart Cameras
18
5. Now you can open you source code if you double click to blob.c and you can compile the file
by clicking on the “build all” button (see red circle in following screenshot).
6. The compiler warning: “
entry point other than _c_int00 specified
” is not relevant as VCRT
uses a different entry point.
According to the Build options 2 output files are generated through compilation (see section 4.6.2):
-
new.out
-
new.msf
Both files are stored under C:\ti\myprojects\send if the configuration of CCS has been done as
described in section
New.out can be uploaded into the camera memory using FTP transfer. The msf file is required for
uploading programs using RS232 serial communication or Telnet port 23. See section 8.3.18 for
details on communication with the camera and details on program file upload.
1996-2011 Vision Components GmbH Ettlingen, Germany
Getting_Started_VC.pdf
