Vision & Control R-CLR-132x104-G523-SL, Installation And Operating Instructions Manual

Page: 19 / 32

R-CLR-132x104-G523-SL
Operation
© Vision & Control GmbH 2017 19
170
126_99
9.994
.746.10
-e
n-
1
.0
Danger of burns due to hot surface
6.3 Operating Modes
Continuous mode
The device will be continuously operated using LED current permissible in
continuous mode. Do not exceed the maximum permissible value of continu-
ous current
(see chapter 8.2 “Electrical Parameters” on page 22) .
Flash mode
The device will be operated using current pulses permissible in flash mode.
Do not exceed the maximum permissible parameters in the flash mode
(see chapter 8.2 “Electrical Parameters” on page 22) .
"
CAUTION
The housing of the device can reach temperatures
exceeding 55 °C during operation.
• Do not touch the device during operation.
• Allow the device to cool before touching it.