A-DIF-60x90-G525-SL
Commissioning
6.2 Mounting the Device
NOTICE
Installation and connection operations may only be performed in the off and
de-energised state.
To mount the device, tapped holes are located at the sides.
3
2
1
1
3
4
Image 6: Mounting holes
1
4 x M4 tapped hole (through bore)
4 x
Ø
6 H7 - depth: 3.4 mm (on both sides)
2
4 x M3 tapped hole
Maximum screw-in depth: 6.2 mm
3
2 x M3 tapped hole (on both sides)
Maximum screw-in depth: 10.0 mm
4
4 x M3 tapped hole
Maximum screw-in depth: 10.0 mm
24
999.995.576.10-en-1.0
© Vision & Control GmbH 2019
