vicosys
®
6300
Important Information
1 IMPORTANT INFORMATION
1.1 Information about the Instructions of Use
This document contains technical information, important instructions for correct installation,
commissioning and use, as well as product information which were up-to-date at the time of
going to press.
Using this document makes it easier for you to familiarise yourself with the device and avoid
malfunctions caused by improper operation.
The instructions of use and the local regulations and rules must be followed.
To ensure a save and proper application, please read the instructions of use carefully and
keep them for future reference.
1.2 Intended Use
The device is intended exclusively for use as a machine vision system for industrial image
processing in automation technology.
It is intended for use in a confined environment.
The device is not suitable for use in potentially explosive areas.
The device may only be used if it is in technically faultless condition and only for its intended
purpose, and only in accordance with the specifications in this instructions of use by
authorised operative personnel, who are aware of the safety rules and hazards.
If the device is planned to be used for any other purpose or in a different environment, the
express authorisation of the manufacturer must be obtained in advance. Any modifications or
adaptations required may only be made by the manufacturer.
1.3 Improper Use
All unintended use and all device-related activities not described in these instructions of
use is to be deemed as unauthorised misuse outside the legal limits of indemnity of the
manufacturer.
Reasonably foreseeable misuse is:
•
Non-compliance with the instructions for use,
•
Faulty operation,
•
Operating by personnel not qualified or instructed,
•
Operating the device if it is not in a proper technical condition,
•
Operating the device in ambient conditions differing from the corresponding specifications
in the instructions of use
•
Operating the device with voltages differing from the corresponding specifications in the
instructions of use,
•
Using spare parts which are not original parts from the manufacturer,
•
Using incompatible accessory components,
•
Improper maintenance and repair works,
•
Unauthorised modifications to the device.
6
999.995.428.10-en-2.1
© Vision & Control GmbH 2022
