Vision & Control 2-05-608 Page 5 Instructions For Use Manual Download

Page: 5 / 40

TOB42/11.0-145-F10-WN

Table of Contents

6.2.3 Mounting at the camera..................................................................... 31

6.3 Configuration...............................................................................................32

6.3.1 Setting the working distance.............................................................. 32

7 Operation......................................................................................................33

8 Maintenance and Service........................................................................... 34

8.1 Maintenance............................................................................................... 34

8.2 Service........................................................................................................36

9 Disposal........................................................................................................37
Table of Figures

1: Device view.................................................................................................13

2: Type plate................................................................................................... 13

3: Illustrative sketch of optical characteristics................................................ 19

4: MTF - spatial frequency dependent (470 nm, F10, WD 145.3 mm)........... 20

5: MTF - spatial frequency dependent (525 nm, F10, WD 144.2 mm)........... 20

6: MTF - spatial frequency dependent (635 nm, F10, WD 144.1 mm)........... 21

7: MTF - spatial frequency dependent (850 nm, F10, WD 145.5 mm)........... 21

8: MTF - spatial frequency dependent (white, F10, WD 144.5 mm)...............22

9: MTF - image field dependent (470 nm, F10, WD 145.3 mm).....................23

10: MTF - image field dependent (525 nm, F10, WD 144.2 mm).....................23

11: MTF - image field dependent (635 nm, F10, WD 144.1 mm).....................24

12: MTF - image field dependent (850 nm, F10, WD 145.5 mm).....................24

13: MTF - image field dependent (white, F10, WD 144.5 mm)........................ 25

14: Lateral chromatic aberration - wavelength dependent............................... 26

15: Longitudinal chromatic aberration - wavelength dependent.......................26

16: Distortion - wavelength dependent.............................................................27

17: Vignetting.................................................................................................... 27

18: Assembly regions....................................................................................... 30

19: Illustrative sketch - working distance..........................................................32

999.995.975.10-en-1.3

Summary of Contents for 2-05-608









































Search results

Summary of Contents for 2-05-608

Reviews:

Related manuals for 2-05-608

Brands by name

Popular brands

Vision & Control 2-05-608, Instructions For Use Manual

Search results

Summary of Contents for 2-05-608

Reviews:

Related manuals for 2-05-608

Brands by name

Popular brands