LDLF60x420-IR850/24V
Operation
7.1 Making Operational Readiness
The device is switched on by applying the operating voltage.
The device is switched off by disconnecting it from the operating voltage
supply.
7.2 Operating Modes
The integrated controller supports the following operating modes:
•
Continuous operation
•
Continuous operation, switchable
Continuous operation
The lighting is switched on by setting the ON/OFF signal after the delay time t
d
.
Resetting the ON/OFF signal turns off the lighting.
Continuous operation, switchable
The switchable continuous operation is carried out by continuously setting and
resetting the switching signal ON/OFF.
Consider the switching delay time t
d
of the lighting. Set the exposure time of the
camera to be within the t
ON
range.
The length of the Power-on time t
ON
corresponds to the length of the switching
signal.
© Vision & Control GmbH 2019
999.995.672.10-en-1.0
25
