Installation and Mounting
© Vision & Control GmbH 2017
15
170
127_99
5.2 Mounting the Accessories
5.2.1 Lens Adapter
Figure 5:
Installation by means of an adapter ring (general display)
1. According to whether the objective is endocentric or telecentric, screw an
appropriate adapter ring (1) (
see chapter 8.5 "Accessories" on page 25
into the filter thread of the lens barrel (2), or place it on the lens barrel (2)
and fixate it with threaded pins.
2. Mount the lighting unit (3) on the adapter ring (1).
3. Hand-tighten the three threaded pins (4) alternately a little at a time.
1
Adapter ring
2
Lens barrel
3
Lighting
4
M2.5 threaded pin (3 x, lateral)
1
4
2
3
4
