DL30x90-IR850/24V
Commissioning
6.2 Mounting the Device
NOTICE
Installation and connection operations may only be performed in the off and
de-energised state.
To mount the device, tapped holes are located at the sides.
1
1
2
2
2
2
Image 5: Mounting holes
1
2 x M3 tapped hole (on both sides)
Maximum screw-in depth: 6 mm
Distance between the tapped holes: 25 mm
2
4 x M3 tapped hole (on both sides)
Maximum screw-in depth: 6 mm
Distance between the tapped holes: 25 mm
© Vision & Control GmbH 2019
999.995.554.10-en-1.0
21
