Vision & Control 1-13-956, Instructions For Use Manual

Page: 18 / 36

LDLF60x480-G525/UDC
Technical Data
5.2 Electrical Parameters
NOTICE
Verify that temperature, current and pulse time are kept inside specified
limits! Please refer to the diagram: "Pulse load " .
There is no automatic limitation of the electrical parameters. The temperature
of the device is not monitored automatically.
Parameter Min Max
Continuous operation
LED current I
LED
3.8 A
(1)
Forward voltage U
LED
at I
LED Max
5.4 V 7.2 V
Power consumption P
tot
25.0 W
(1)
Flash mode / Pulse mode
LED current I
LED
20.0 A
(2)
Forward voltage U
LED
at I
LED Max
6.6 V 8.4 V
Flash performance P
flash
155.0 W
(2)
(1)
The maximum values refer to an ambient temperature of 25 °C and free
convection.
(2)
Verify that temperature, current and pulse time are kept inside specified
limits! Please refer to the diagram: "Pulse load " .
18 999.995.506.10-en-2.2 © Vision & Control GmbH 2019