VISIOMED Bewell MyOxy, User Manual, Page: 12 / 52

BewellConnect - BW-OX1 - User Manual - 072017v2 12
- Do not sterilize the device in an autoclave, with ethylene oxide or by immersing it in liquid. The
device must not be sterilized.
7. TECHNICAL SPECIFICATIONS
Product name BewellConnect® My Oxy
Model BW-OX1
Classification Classe II
Applied part type BF
IP22
Display type LED screen
LED Specifications Wavelength: Red = 660 ±3nm - Infrared = 905 ±10nm
Radiant power : Red = 3.2mW - Infrared = 2.4mW
Dimensions 1.3 x 1.3 x 2.4 in / 32 x 32 x 62 mm
Weight 1.41 oz / 40 g
Display and
measuring ranges
SpO
2
: Display range : 35 - 99% / Measuring range : 70 - 99%
Pulse: Display and measuring ranges: 30 - 250 bpm
Accuracy SpO
2
: 70 - 100% : ± 3%
Pulse : ± 2 bpm
Resolution SpO
2
: 1%
Pulse : 1 bpm
Normal working
conditions
Temperature : 41°F - 104°F / 5°C - 40°C
Humidity : 15-93%RH
Storage conditions Temperature : -13°F - 158°F / -25°C - 70°C
Humidity : ≤93%RH
Atmospheric pressure : 86-106Kpa
Technology Bluetooth 4.0 Smart Ready
Battery Lithium 280mAh
Autonomy 400 readings
Automatic shut-
down
8 seconds
Bluetooth
transmission
distance
10m
Frequency 2400 - 2483.5MHz
USB USB port 2.0
Accessories
provided
Pulse oximeter, instruction manual, protective pouch, USB cable
8. TROUBLESHOOTING
If one of the following issues arises when using your
My
Oxy, consult this trouble-shooting
guide. If the problem continues, please contact our customer service department at
www.support.bewell-connect.com.
ISSUE POSSIBLE CAUSE SOLUTION
Sp0
2
or PRbpm
do not appear
correctly
Your finger must be
correctly inserted.
Change the position of your finger and try again.
SpO
2
reading
too small to be
measured.
Try several times. If you have any doubts about
a problem related to the product, seek medical
attention to obtain an accurate diagnosis.
Sp0
2
or PRbpm
are unstable
Your finger may not
be inserted deeply
enough.
Change the position of your finger and try again.
The user’s finger is
trembling or the
user is moving.
Try not to move.
Impossible to
turn on the
device
Battery low Recharge the device with the USB cable
Oximeter is damaged Contact customer service