EN - 57
Legend ‘70s
– User Manual
System menu
Prog +/- Type
Functioning mode of the two-switch foot switch connected to PEDAL [P / -].
Values:
Normal:
the right switch is assigned to P function, the left switch to PROGRAM
–
.
Inverted:
the right switch is assigned to the PROGRAM
–
function, the left switch to PROGRAM
+.
NB
When using a single-switch pedal, this parameter can be used to choose between the PROGRAM
+ and PROGRAM
–
functions .
Pedal calibration
When connecting pedals to
PEDAL [SUSTAIN], PEDAL [FOOT CONTROLLER 1] and [FOOT CONTROLLER 2]
it might
be useful to perform a calibration, if the functioning range is incorrect (see the parameters
Sustain Range
,
FC1
Range
and
FC2 Range
under the
PEDAL SETUP
menu). To calibrate the pedal, follow this procedure:
1.
Scroll until you see the
Sustain Range
,
FC1 Range
or
FC2 Range
parameter, according to the pedal you
wish to calibrate.
2.
To start the calibration, press the data entry dial.
3.
Move the pedal to its maximum and minimum positions, checking that the
MIN
and
MAX
field show the right
percentage value.
4.
Press the data entry dial to save the new calibration (‚Calibration stored!‛ message) or [EXIT] to cancel
(‚Calibration aborted!‛ message).
PREFERENCES section
The
PREFERENCES
menu allows the user to customise some instrument functions.
To access this menu, enter the
SYSTEM
page and place the cursor on the
PREFERENCES
field, then press
the data entry dial.
Parameter name
Description
Confirm Prg
Enable / disable the need for confirmation when loading a Program. When the parameter value is
OFF, a Program is loaded immediately when selected. When the parameter value is ON, the user
must select a Program and then press the data entry dial to load it.
Values:
OFF, ON
All Notes Off
Turn off, changing Program, of any notes.
Values:
Disabled, Enabled
Leds Intensity
Brightness of all the Leds on the panel.
Values:
between 1 and 8
Display Contrast
Set the OLED display contrast.
Values:
between 1 and 8
USB to Device
Functioning mode of the [USB TO DEVICE] port.
Values:
Flash Drive:
for the use with a USB flash drive.
Charger:
to charge a tablet or smartphone.
USB Audio Level
Signal level of the USB stereo Audio received through the [USB TO HOST] connector.
Values:
between1 a 127
Memory Lock
Prevents from saving Programs and Songs, together with loading backup files, so as to avoid
undesired memory overwriting.
Values:
OFF, ON
Auto Power Off
How long the instrument has to be idle before it shuts down automatically.
Values:
Disabled, 30 min, 120 min
NB
-
To switch on the instrument after it was shut down by the
Auto Power Off
function, set the [POWER] switch to ‚0‛
(OFF), wait 10 seconds, then set the switch to ‚1‛ (ON).
-
All unsaved data is lost when the instrument shuts down automatically. To prevent that, always save the changes
you don't want to lose.
Summary of Contents for Legend '70s Artist
