Dosing system eco-CONTROL EC200-K
Operation and maintenance instructions
Version 1.8
Copyright ©
5.12
Select the dosing program
Only possible if using a memory card. If there is no memory card, then only program 00
(volatile memory) is available.
5.13
Changing a dosing program
Only possible if using a memory card. If there is no memory card, then only program 00
(volatile memory) is available.
• Press the
PRG
key,
system selection menu
,
display 2 appears.
• Select
Administration
, display 25 appears.
Dis
pl
ay 2
• Activate
Select program
, display 26 appears.
Program 00 (volatile memory) or the last program
that was used is shown.
Di
sp
la
y 2
5
• Select and confirm the desired program number, the
selected program is activated,
dosing can be done at once. (See also 5.14)
Displa
y 26
• Press the
PRG
key,
system selection menu
,
display 2 appears.
• Select
Administration
, display 25 appears.
Display 2
Start/stop
Time program
Calibration auto
Calibration manuel
Teach in function
Administration
Quantity program
10 47h
Fr 18.03.11
Service
Esc OK
Change program
Tolerance of pressure
Password protection
Analog input
Adjust time
Select program
Start/stop
Time program
Calibration auto
Calibration manuel
Teach in function
Administration
Quantity program
10 47h
Fr 18.03.11
Service
Esc OK
Summary of Contents for Preeflow eco-CONTROL EC200-K
Page 2: ...Item No 20202 Print 20 1 12 ...
Page 36: ......
