PART A: Basic machine
Shredder
L 60; L60+
©
VIRTUS EQUIPMENT 2018 All rights reserved
Page 24
4.12
Safety measures at the application site
Requirements at the application site: see chapter
Initial Start-up
.
The machine must be erected horizontally on a horizontal surface
and in a stable manner.
Ensure by means of appropriate in house orders and controls that
the environment of the work station is always clean and clear of
obstructions.
4.13
Fire fighting agents
In the case of fire, disconnect the power supply of the machine or
pull out the mains plug. Extinguish the fire from a distance of
several meters using a fire extinguisher suitable for the machine
and the grinding material.
4.14
Cleaning agents
Only use suitable cleaning agents to clean the machine and in
doing so, the advice of the manufacturer is to be heeded. Please
be aware that unsuitable cleaning agents (e.g. thinners) can
damage the paint of the machine as well as the cables and plastic
parts.
4.15
Conduct in case of an emergency
The machine may only be operated with the installed Emergency
Stop buttons. An Emergency Stop button must be mounted onto
the control cabinet, the second onto the grinding material in feed.
Emergency Stop:
In case of emergency, immediately press one of the
Emergency
Stop buttons
.
CAUTION
The EMERGENCY STOP must be activated in all situations
whereby injury or damage could result!
Reoperation:
Eliminate cause of Emergency Stop.
Unlock
EMERGENCY STOP BUTTON
.
Acknowledge fault.
The machine is now ready for operation again.
