PART A: Basic machine
Shredder
L 60; L60+
©
VIRTUS EQUIPMENT 2018 All rights reserved
Page 16
Type of danger:
Danger of crushing, cutting and amputation
caused by run-down of the rotor.
Activity:
Maintenance work.
Possible
consequences:
Serious injury or death can result.
Preventative
measures:
The maintenance doors must always be
tightly locked during operation. Do not make
the run down safety devices ineffective by
using technical aids or other manipulations.
Never check by hand whether the rotor has
come to a stop.
4.8.2
Electrical dangers
Danger:
Direct or indirect contact with live parts in the
terminal box.
Activity:
Maintenance work, start-up.
Possible
consequences:
Serious injury or death.
Preventative
measures:
Only trained electricians may only carry out
all work on the electrical equipment.
If work is necessary on parts, which conduct
dangerous voltage, a second person should
be called in who can break the power supply
in case of emergency.
The yellow-marked lines conduct voltage
even when the machine is switched off (main
switch to 0).
Only use original safety fuses with stipulated
intensity of current.
Faulty electrical components must be
replaced immediately.
If faults occur in the electrical energy supply,
switch machine off immediately.
The terminal box must be locked during
operation. Before opening the terminal box:
Main switch to 0.
