2
COMPOSS | User's manual
2. ASSEMBLY
Mount on an iron surface
COMPOSS has 4 magnets to get secured on the panels that have a
magnetic metal surface.
Mount on a non iron surface
Remove the compass' bottom plate, unscrewing the 2 screws: one in the front
and one in the back, using the allen key (B).
Screw using 2 screws (not included) the bottom plate to desired surface. Re-
assemble the compass with the 2 screws previously removed.
Connect the USB cable to the computer where the flight simulator software is running.
If you cannot or don't want to screw on the surface where you want to place
the compass, you can use double sided adhesive tape or adhesive velcro
(not included).
Apply the adhesive on the bottom plate without removing it from the compass.
