Chapter 10 T r o u b l e s h o o t i n g 3 0
stereo input, images aren’t make sure everything is OK image mismatch problems
fusing into one stereo image with the HMD by testing in will cause eyestrain and
MONO mode. If this is OK should be fixed promptly
and the problem persists, it
is due to software configu-
ration. Adjust conver-
gence/parallax as appropriate
MECHANICAL
PROBLEMS
front shell fore/aft motion
too loose or too tight
adjust detent screw at front
of headband--see manual for
instructions
HMD seems front heavy HMD cable and tracker cable
should fall down user’s
back, not over shoulder.
With cable at back, weight
should be centered
headband ratchet knobs too adjust ratchet tightness with
loose or too tight
phillips head screw at center
of ratchet knob
