FUNCTION SETTINGS
Enter function setting mode.
Press
[ON/OFF]
to turn the power off, Press
[ZERO]
first, then press
[ON/OFF]
,
while keeping
[ZERO]
pressed, the display will show
A_ON
or
A_OFF
.
1. Selection of auto backlight mode.
When the balance enter function setting menu. Press
[UNIT]
key, the display
will show
L_ON
or
L_OFF
, press
[ZERO]
, selection display
L_ON
, this
means auto backlight function active, press
[ZERO]
again, the display will
show
L_OFF
, this means auto backlight function inactive, i.e. shut off
backlight function.
2. Selection of auto shut off mode.
When the balance enter function setting menu. Press
[UNIT]
key, the display
will show
A_ON
or
A_OFF
, press
[ZERO]
, selection display
A_ON
, this
means auto shut off function active. Press
[ZERO]
again, the display will
show
A_OFF
, this means auto shut off function inactive.
3. Return to weighing mode.
Press
[ON/OFF]
to turn the power off, press
[ON/OFF]
again to turn on the
power and the scale return to the weighing mode.
Counting procedures
1.Press [ON/OFF] to turn on the scale.
Wait for "0" to appear on the display.
2.Start the Count Procedure
If necessary, press
[ZERO]
key to set the display to “0”.
3.
Place a given number of samples of an item on the pan (the Sample Size should
be either 10
、
20
、
50 or 100 pieces). The weight of these samples will show on the
display.
4.
Press the
[UNIT]
key several times to put the scale in PCS mode.
5.
Select the sample size (the same as you chose above) by pressing the
[PCS]
key.
(press it as many times as necessary to put it in the correct sample size ,the
sample size is the same as in step three =10
、
20
、
50or100.
7. Press the
[UNIT]
key, the display will show “selected pcs”, then the scale will
recall the sample size you selected and show the starting sample size on the
display (you can now remove the samples if you want to return the scale to 0)
5
PARTS DESCRIPTION
RIGHT SIDE
AC adaptor
Socket
TOP
Weighing platform
The stainless steel circle pan
Display
ON/OFF
key
Turns the scale
power on/off.
PCS key
UNIT
key counting mode
Changes weighing units, g, oz, lb, dwt, tl.H, ct, ozt or pcs(counting mode).
ZERO
key (for TARE)
ets display to zero or
Subtracts weight of a container.
BOTTOM
Battery compartment
Battery compartment cover
Batteries
Use 6 AA batteries
DISPLAY
STABLE
indicator Auto backlight function indicator
Indicates when the reading is stable.
Auto shut off function indicator
ZERO
indicator
Indicates when the reading is 0
Weighing unit
Low battery indicator
2
