virtual access GW9000 Series Installing Download Page 14 | Manualshive

Page: 14 / 14

virtual access GW9000 Series Installing Download Page 14

Error! Reference source not found.: Error! Reference source not found.

______________________________________________________________________________________________________

4

GW9000 installation summary

1.

Rack mount the GW9000 in a 19-inch rack.

2.

If you are installing a 3G model, the SIM card must be inserted into the router before

it is powered on. Do not insert or remove the SIM card after the unit has been

powered on.

3.

Using the pin assignment in section 3.9, connect the multi-I/O cable to the analogue

inputs, digital inputs and digital outputs.

4.

Connect the WAN link (3G, E1/T1, Ethernet, ADSL).

5.

Connect the Multi-I/O cable to the GW9000.

6.

Connect the GW9000 RS232 ports to the third party equipment.

7.

Connect the power to the unit.

8.

Connect an Ethernet port to a PC.

9.

Configure the router if it has not been pre-configured.

______________________________________________________________________________________________________

© Virtual Access 2014

Installing a GW9000 Series Router

Issue 2.0

Page 14 of 14

«
...
12
13
14

Summary of Contents for GW9000 Series















Reviews:

No comments