virtual access GW2021 User Manual Download Page 206

Page: 206 / 423

21: Automatic operator selection

_______________________________________________________________________________________________________

GW2020 Series User Manual

Issue: 2.1

Page 206 of 423

Web: HDR Auto User ID
UCI: mobile.main.hdr_userid
Opt: hdr_userid

AN-PPP user ID. Supported on Cellient (CDMA) modem only.

Blank

Range

Table 62: Information table for mobile manager basic settings

21.2.9.2

Caller settings

Web Field/UCI/Package Option

Description

Web: Name
UCI: mobile.@caller[0].name
Opt: name

Name assigned to the caller.

Blank

Range

Web: Number
UCI: mobile.@caller[0].number
Opt: number

Number of the caller allowed to SMS the router. Add in specific

caller numbers, or use the wildcard symbol.

Blank

Range

Web: Enable
UCI: mobile.@caller[0].enabled
Opt: enabled

Enables or disables incoming caller ID.

Disabled.

yes

Enabled.

Web: Respond
UCI: mobile.@caller[0].respond
Opt: respond

If checked, the router will return an SMS. Select Respond if you

want the router to reply.

Disabled.

Enabled.

Table 63: Information table for mobile manager caller settings

Summary of Contents for GW2021








































































































































































































































































































































































































































Search results

Summary of Contents for GW2021

Reviews:

virtual access GW2021, User Manual, Page: 206 / 423

Search results

Summary of Contents for GW2021

Reviews: