virtual access GW2021 Page 198 User Manual Download

Page: 198 / 423

21: Automatic operator selection

_______________________________________________________________________________________________________

GW2020 Series User Manual

Issue: 2.1

Page 198 of 423

Web Field/UCI/Package Option

Description

Web: HDR Auth User ID
UCI: mobile.main.hdr_userid
Opt: hdr_userid

AN-PPP user ID. Supported on Cellient (CDMA) modem only.

Blank

Range

Depends on the CDMA provider.

Web: HDR Auth User Password
UCI: mobile.main.hdr_password
Opt: hdr_password

AN-PPP password. Supported on Cellient (CDMA) modem

only.

Blank

Range

Depends on the CDMA provider.

Web: Ordered Registration triggers module

reboot
UCI: mobile.main.

mobile.main.cdma_ordered_registration_rebo

ot_enabled
Opt:

cdma_ordered_registration_reboot_enabled

Enables or disables rebooting the module after Order

Registration command is received from a network.

Disabled.

Enabled.

Web: Station Class Mark
UCI: mobile.main.cdma_station_class_mark
Opt: cdma_station_class_mark

Allows the station class mark for the MS to be changed.

0-255

Web: Slot Cycle Index
UCI: mobile.main.cdma_slot_cycle_index
Opt: cdma_slot_cycle_index

The desired slot cycle index if different from the default.

0-7

Web: Slot Mode
UCI: mobile.main.cdma_slot_mode
Opt: cdma_slot_mode

Specifies the slot mode.

Web: Mobile Directory Number
UCI:

mobile.main.cdma_mobile_directory_number
Opt: cdma_mobile_directory_number

Allows the mobile directory number (MDN) to be changed

Default

Programmed in module.

Digits

Up to 15 digits.

Web: MOB_TERM_HOME registration flag
UCI: mobile.main.

cdma_mob_term_home_registration_flag
Opt:

cdma_mob_term_home_registration_flag

The MOB_TERM_HOME registration flag

Disabled.

Enabled.

Web: MOB_TERM_FOR_SID registration flag
UCI: mobile.main.

cdma_mob_term_for_sid_registration_flag
Opt:

cdma_mob_term_for_sid_registration_flag

The MOB_TERM_FOR_SID registration flag

Disabled.

Enabled.

Web: MOB_TERM_FOR_NID registration flag
UCI: mobile.main.

cdma_mob_term_for_nid_registration_flag
Opt:

cdma_mob_term_for_nid_registration_flag

The MOB_TERM_FOR_NID registration flag

Disabled.

Enabled.

Web

: Access Overload Control

UCI:

mobile.main.cdma_access_overload_control
Opt: cdma_access_overload_control

Allows the access overload class to be changed

Default

Programmed into module as part of IMSI

Range

0-7

Web: Preferred Serving System
UCI:

mobile.main.cdma_preferred_serving_system
Opt: cdma_preferred_serving_system

The CDMA Preferred Serving System(A/B)

Web: Digital Analog Mode Preference

UCI: cdma_digital_analog_mode_preference
Opt: cdma_digital_analog_mode_preference

Digital/Analog Mode Preference.

Summary of Contents for GW2021








































































































































































































































































































































































































































Search results

Summary of Contents for GW2021

Reviews:

Related manuals for GW2021

Brands by name

Popular brands

virtual access GW2021, User Manual

Search results

Summary of Contents for GW2021

Reviews:

Related manuals for GW2021

Brands by name

Popular brands