Virax 162600, User Manual

Page: 19 / 51

DESCRIPTION, MAIN COMPONENTS, SPECIFICATIONS
ENGLISH
19
Description
• This machine makes circular grooves at the end of steel tubes in order to facilitate the assembly of
circular
couplings. It is the ideal tool for the construction industry and the piping construction sector. The
grooves are made by a grooving roller which is inserted hydraulically inside the tube which, at the same time,
is supported by a guide screw.
The machine is equipped with two upper rollers and three lathe screws which can machine the following tubes
(refer to table 1 to see the suitable combination of roller and lathe screw to be used in each case):
From 2 to 2 1/2 inches in diameter
From 3 to 6 inches in diameter
From 8 to 12 inches in diameter
Main components
1 Locknut
2 Set nut
3 Hydraulic cylinder
4 Cylinder stop valve
5 Floating slide
6 Roller slide
7 Roller shaft
8 Protector
9 Lathe screw
Specifications
10 Head body
11 Feet base
12 Sleeve body
13 Holder
14 Switch
15 Motor cover
16 Reduction gearbox
17 Safety foot switch
Max. permitted diameter 325 mm
Min. permitted diameter 60 mm
Max. permitted tube thickness 10 mm
Max. working pressure 8000 Kg
Max. hydraulic cylinder pressure 40 Mpa
Oil tank capacity 150 ml
Lathe screw speed 23 rpm
Electric motor 1500 W
General dimensions
(W xD xH)
910 x 450 x 910 mm
Weight 170 Kg
Standard unit
Grooving machine with propeller shaft and set of grooving
rollers for diameters of 2 to 6 inches. Grooving machine with
propeller shaft and set of grooving rollers for diameters of 8 to
12 inches.
Delivered with :
- Tube support
- Stabiliser
- Safety foot switch
CHRYSSAFIDIS S.A./ ATHENS: 3 AGRINIOU STR, TAVROS - (+30) 210 4836315-20
THESSALONIKI: DA12A STR, OT32, BIPE SINDOU - (+30) 2310 754681-4 / www.chryssafidis.com / sales@chryssafidis.gr