VIRATA ATMOS Console, Command Reference Manual

Page: 80 / 248

list all open channels
70 ATMOS Console Commands Reference Manual (Binary) DO-008530-PS, Draft B (26th April 2001)
5.15 list all open channels
5.15.1 Syntax
list all open channels [<portname> ]
5.15.2 Description
This command is similar to the list channels command. The
list channels command shows channels which are either enabled or
open . The list all open channels command only shows channels which
are open .
If no portname is specified, all channels on all ports will be displayed.
The channels are shown with their identification number and a selection
of
useful attributes. A full attribute list can be obtained via the show
channel command.
5.15.3 See also
list channels on page 69.