ENGLISH
OPERATING INSTRUCTIONS
7
GROUNDING INSTRUCTIONS
General – This air mover shall be grounded while in use to protect the operator from electrical
shock. The machine is provided with a three – conductor cord and a three – contact grounding
type attachment plug to fit the proper grounding type receptacle.
The green (or green & yellow) conductor in the cord is the grounding wire. Never connect this wire
to anything other than the grounding pin of the attachment plug.
Make sure that all the safety functions are normal, and ensure that the actual operation voltage is
in accordance with the required voltage rate. Make sure
that the machine is connected to an outlet
having the same configuration as the plug. No adapter should be used with this machine.
This machine is intended for commercial use only. It is constructed for use in an indoor
environment and is not intended for any other use.
BASIC OPERATION
1) Check the machine for any obstructions in fan prior to operation.
•
If an item blocks the intakes of the air mover, this will hurt the performance of the
machine, a
nd could cause the motor to overheat.
2) Adjust machine to desired position for operation by pulling it back to its preset height
adjustments.(Air blower drying direction without stretching rod is referred to “
F1
”; Air blower drying
direction with stretching rod is referred to “
F2
”.)
3) Plug power cord into a grounded outlet.
•
Do not use an extension cord in conjunction with the standard power cord.
6)
This machine
is not intended for use by persons with reduced physical,
sensory, or
mental capabilities, or lack of experience and knowledge, unless
they have been given
supervision or instruction concerning use of the machine
by a person responsible for their
safety.
7)
Children should be supervised to ensure that they do not play with the machine.
8)
If the power cord is damaged, please replace the cord by the manufacturer, it’s
service
agent, or a qualified technician in order to avoid any danger.
4) This machine has 3 power settings. Turn the power knob to the desired speed.
•
Low = 1 Med = 2 High = 3.
