16
© 2009 Directed Electronics. All rights reserved.
H1/6
BROWN
(-) HORN OUTPUT
This wire supplies a (-) 200 mA output that can be used to honk the
vehicle horn. It outputs a single pulse when locking the doors with the
remote, and two pulses when unlocking with the remote. This wire also
outputs pulses for 30 seconds when Panic Mode is activated. If the
vehicle has a (+) horn circuit, an optional relay can be used to inter-
face with the system. (Must be turned On in Programming: See Menu
1, Feature 1.)
H1/7
RED/WHITE
(-) TRUNK RELEASE OUTPUT
When the system receives the code controlling trunk release, for longer
than 1.5 seconds, the RED/WHITE wire will supply a (-) 200mA output
as long as the transmission continues. This is often used to operate a
trunk/hatch release or other relay-driven function.
Important:
Never use this wire to drive anything ex-
cept a relay or low-current input! The transistorized
output can only supply 200 mA of current. Connect-
ing directly to a solenoid, motor, or other high-current
device will cause it to fail.
H1/7 RED/WHITE
Summary of Contents for 4103XV
Page 6: ......
Page 49: ...49 2009 Directed Electronics All rights reserved Notes...
