background image

OPERATING AND MAINTENANCE INSTRUCTIONS 

196cc 4-Cycle Engine

Check for parts online at 

www.getearthquake.com

 or call 800-345-6007 M-F 8-5

7

GENERAL SAFETY PRECAUTIONS

Please read this section carefully. Operate the engine according to the safety 

instructions and recommendations outlined here and inserted throughout the 

text. Anyone who uses this engine must read the instructions and be familiar 

with the controls.
Owner’s Responsibility: 
It is the owner’s responsibility to accurately assemble the engine for safe and 

effective use.
•  Read and follow all safety instructions.
•  Carefully follow all assembly instructions.
•  Maintain the engine according to directions and schedule included in this 

operator’s manual.
•  Ensure that anyone who uses this engine is familiar with all controls and 

safety precautions.

SIGNAL WORDS

A signal word alerts you to potential hazards that could harm you or 

others.  Each signal word is preceded by the safety alert symbol fol-

lowed by the word DANGER, WARNING, CAUTION or IMPORTANT.

Each signal word will make you aware of what the hazard is, what can hap-

pen, and what you can do to prevent or decrease injury occurrence.

WARNING

!

WARNING INDICATES YOU CAN BE KILLED OR SERI-

OUSLY INJURED IF THE SAFETY INSTRUCTIONS THAT 

FOLLOW THIS SIGNAL WORD ARE NOT OBEYED.

DANGER

!

DANGER INDICATES YOU WILL BE KILLED OR SERI-

OUSLY INJURED IF THE SAFETY INSTRUCTIONS THAT 

FOLLOW THIS SIGNAL WORD ARE NOT OBEYED.

CAUTION

!

CAUTION INDICATES YOU CAN OR YOUR EQUIPMENT 

CAN BE HURT IF THE SAFETY INSTRUCTIONS THAT 

FOLLOW THIS SIGNAL WORD ARE NOT OBEYED.

IMPORTANT

INDICATES HELPFUL INFORMATION FOR PROPER AS-

SEMBLY, OPERATION, OR MAINTENANCE OF YOUR 

ENGINE.

Summary of Contents for 31338/E

























Reviews: