background image

Chapter 2   Deployment Touch Panel

 

Manual VIPA HMI 

2-28 

 

HB160E - TP - RE_62I-IEE0 - Rev. 11/14 

Access to the network resources 

 

The Touch Panel allows you to access shared resources in a Microsoft 
network like drives and printer. Here you may assign existing public 
directories or printer in the network to local directories or printer in the 
Touch Panel. 
Condition for this is that you are logged in to the network with your user 
name and password. 
The assignment of a network resource is performed in the Touch Panel via 
the command console "Command Prompt". Start the command console 
with 

START 

Programs 

Command Prompt. 

The access to the network resource is performed with the commands 

Net 

view 

and 

Net use

 

Shared resources of a network PC can be listed by the command: \> 

net 

view PC-Name

  

For example 

net view testserver

 lists all shared resources of the 

network PC "test server". To test the physical connection a PING to the IP 
address of the network PC may be executed if there are problems while 
contacting the network PC. 
 
 
 
 

 

 
 

 

 
The connection of a local name at the Touch Panel with a shared drive of 
the network PC happens with the following approach: 

• 

Enter the following in the command prompt: 

 

\>

 net use local_name \\network drive 

 /user:User name   

 

• 

Enter 

user name, password

 and where app. 

user group.

 

After successful login the following message appears:  

 

Successfully mapped to network name

The connected network drive is then available on the Touch Panel with the 

local name

 via 

My Device

 at 

Network.

 

 
Local_Name: 

data

, network drive: 

testserver\archive

, User name:

gast

 

 

 
Entry: \> 

net use 

data

 \\

testserver\archive

 /user:

gast

  

The connected network drive is then available via \network\

data

 at the 

Touch Panel. 

Overview  

List released 
resources 

Connect net drive 

Example: 

   

\> net view testserver 

Shared resources on \\testserver: 

 

Share name       Type   Used as          Comment 

--------------------------------------------------------------- 

Archive           Disk   (null)           Process data 

KyoEDV           Print  (null)            Kyocera FS-680 Printer

Command completed successfully 

\> 

 

Summary of Contents for TP 608C































































Reviews: