Manual VIPA TM-E
Chapter 4
Deployment TM-E
HB39E - TME - RE_900-1E650 - Rev. 09/11
3-7
TM-E - Configuration - eBuddy
To deploy the TM-E module, the VIPA software tool "eBuddy" is necessary.
With this new IP address parameters may be assigned to the TM-E
module; you may load and transfer new firmware, backup/restore
applications and access the integrated web page of the TM-E module.
The software tool "eBuddy" may be found at the download area of
www.vipa.de. For installation execute eBuddySetup.exe and follow the
instructions.
Connect the TM-E module via Ethernet and switch on its power supply.
Start eBuddy. This always starts in the last used mode
.
Here the following functions are available:
•
Set or modify the IP address parameters
•
Load or execute a firmware update
•
Backup or restore of an application
To change to the
List mode
from the
Wizard Mode
click to the link "Switch
to list mode". In the
List mode
every TM-E module available in you network
is listed.
By selecting the corresponding TM-E module in the list, there are the same
functions available by context menu (right click), which were listed above.
Additionally the Web page integrated to the TM-E module may directly be
accessed by "Open in browser"
Overview
Installation
Wizard mode
List mode
Wizard mode
List mode
