VIPA System 200V IM Series, Manual, Page: 287 / 348

Manual VIPA System 200V
Chapter 7 SERCOS - Spare part
HB97E - IM - Rev. 06/29 7-5
[1] LED status indicator
[2] Address adjuster
[3] FO connection to SERCOS
[4] DC 24V connection
supply voltage
IM 253Sercos - SERCOS coupler - Structure
The SERCOS coupler IM 253SC supports the easy connection of decentral
peripheral modules of the System 200V to SERCOS.
The SERCOS coupler is distinguished by the following properties:
•
Fiber Optic (FO) Transmitters for use with 1mm Plastic Optical Fiber
and 200
µ
m Hard Clad Silica HCS

•
Support of all SERCOS baudrates (2, 4, 8, 16MBaud)
•
Support of all System 200V modules from VIPA
•
max. 32 peripheral modules, the number of analog modules is limited to
16 modules (please regard the assembly guidelines)
•
max. 256Byte input and 256Byte output data
•
Minimal SERCOS cycle: 1ms
•
Address adjuster addresses (1 ... 89) and parameterization (90 ... 99)
•
Integrated DC 24V power supply for voltage supply from coupler
peripheral modules.
•
LED status indicator
PW
ER
RD
Tx
Rx
LE
ADR.
1
2
-
DC24V
+
X1
VIPA 253-1SC00
X 2
3 4
IN
OUT
IM 253 Sercos
9 9
2
3
1
4
Properties
Front view
253-1SC00