VIPA System 200V IM Series, Manual

Page: 270 / 348

Chapter 6 DeviceNet
Manual VIPA System 200V
6-10 HB97E - IM - Rev. 06/29
Test in conjunction with the DeviceNet
•
Connect the PC containing the
DeviceNet-Manager
and the VIPA
DeviceNet coupler to the DeviceNet.
•
Define the baudrate and the node address at the coupler
•
Turn on the power supply of the bus coupler
•
Start the
DeviceNet-Manager
.
•
Enter the same data rate into the manager that was selected at the bus
coupler
•
Start the function NETWORK WHO in the manager
The following network windows is displayed:
•
Right-click the bus coupler.
•
Select the function DEVICE DETAILS in the context menu.
The DEVICE DETAILS box is displayed on screen
Here you may display DeviceNet address (node address), the Vendor
Code (in this case this is 501 for VIPA GmbH) and other internal
information about every module on the bus.
Approach
Device Details