VIPA System 200V IM Series, Manual

Page: 107 / 348

Manual VIPA System 200V
Chapter 3 Profibus DP
HB97E - IM - Rev. 06/29 3-75
IM 253-xDPx1 - DP-V1 slave - Firmware update
The firmware update for the DP-V1 slave VIPA 253-1DP01 is at this time
only available with Siemens CPUs. For this your firmware is online
transferred from the hardware configurator to the CPU which passes the
firmware on to the according DP slave via the connected DP master using
Profibus.
Note!
The DP slaves IM 253-1DP31 - ECO and IM 253-1DP11 don't support a
firmware update!
•
Make firmware file available
•
Load project into the hardware configurator
•
Transfer firmware
The most recent firmware for the DP-V1 Profibus slaves is to find at
ftp.vipa.de/support/firmware/System%20200V/DP_Slave/IM253-1DP01
as package Px000019_Vxxx.zip with xxx=version.
Extract and copy the file
header.upd
into your work directory.
•
Open the hardware configurator with the configured DP slave.
•
Click on the DP slave and choose
PLC
>
Update Firmware
. This menu
option is only available when the highlighted DP slave supports the
function "Update firmware ".
→
the dialog window "Update firmware " appears.
•
Choose your work directory via the button "Search" where the file
header.upd
is stored. Choose
header.upd
.
→
You will see information
for which modules and from which firmware version on the chosen file is
convenient.
•
Activate the control field "Activate firmware after loading" because only
then the new firmware is copied to the Flash and click then on [Execute].
→
it is proofed if the chosen file is valid and at positive result the file is
transferred to the DP slave.
Note!
During runtime the firmware update at the DP slave is executed after app.
3s. Please regard that the DP slave executes a reboot which may cause
the DP master to remain in STOP res. may influence your user application.
Übersicht
Approach
Supply firmware file
header.upd
Load project into
hardware
configurator