Manual VIPA System SLIO
Chapter 1 Basics and Assembly
HB300E - IM - RE_053-1DN00 - Rev. 11/21
1-11
Wiring
Terminals with spring clamp technology are used for wiring. The spring
clamp technology allows quick and easy connection of your signal and
supply lines.
In contrast to screw terminal connections this type of connection is
vibration proof.
10mm
U
max
: 240V AC / 30V DC
I
max
: 10A
Cross section: 0.08 ... 1.5mm
2
(AWG 28 ... 16)
Stripping length: 10mm
Wiring procedure
(1) Insert a suited screwdriver at an angel into the square opening as
shown.
Press and hold the screwdriver in the opposite direction to open the
contact spring.
(2) Insert the stripped end of wire into the round opening. You can use
wires with a cross section of 0.08mm
2
to 1.5mm
2
.
(3) By removing the screwdriver, the wire is securely fixed via the spring
contact to the terminal.
1
2
3
Connectors
Data
Summary of Contents for SLIO IM 053-1DN00
Page 1: ...VIPA System SLIO IM 053 1DN00 Manual HB300E_IM RE_053 1DN00 Rev 11 21 May 2011...
Page 4: ...Contents Manual VIPA System SLIO ii HB300E IM RE_053 1DN00 Rev 11 21...
Page 8: ...Safety information Manual VIPA System SLIO 4 HB300E IM RE_053 1DN00 Rev 11 21...
Page 28: ...Chapter 1 Basics and Assembly Manual VIPA System SLIO 1 20 HB300E IM RE_053 1DN00 Rev 11 21...
