Manual VIPA TM
Chapter 3
Deployment
HB39E - TM - RE_900-2H611 - Rev. 10/16
3-7
TM - Configuration - eBuddy
To deploy the Teleservice module, the VIPA software tool "eBuddy" is
necessary. With this new IP address parameters may be assigned to the
TM; you may load and transfer new firmware, backup/restore applications
and access the integrated web page of the TM.
The software tool "eBuddy" may be found at the download area of
www.vipa.de. For installation execute eBuddySetup.exe and follow the
instructions.
Connect the Teleservice module via Ethernet and switch on its power
supply. Start eBuddy. This always starts in the last used mode
.
Here the following functions are available:
•
Set or modify the IP address parameters
•
Load or execute a firmware update
•
Backup or restore of an application
To change to the
List mode
from the
Wizard Mode
click to the link "Switch
to list mode". In the
List mode
every TM module available in you network is
listed.
By selecting the corresponding TM in the list, there are the same functions
available by context menu (right click), which were listed above.
Additionally the Web page integrated to the Teleservice module may
directly be accessed by "Open in browser"
Overview
Installation
Wizard mode
List mode
Wizard mode
List mode
Summary of Contents for 900-2H611
Page 4: ...Contents Manual VIPA TM ii HB39E TM RE_900 2H611 Rev 10 16...
Page 8: ...Safety information Manual VIPA TM 4 HB39E TM RE_900 2H611 Rev 10 16...
Page 70: ...Chapter 3 Deployment Manual VIPA TM 3 44 HB39E TM RE_900 2H611 Rev 10 16...
Page 72: ...Index Manual VIPA TM A 2 HB39E TM RE_900 2H611 Rev 10 16 M Stich...
