X 1
Clip
X 1
Post Cap
4 / 5 / 6mm
Hex Wrench
Scan QR code below for
more products from viozon
If you feel the pitching angle too tight or too loose when
adjusting the mount, please adjust the Screw.
The load weight of mount is 3.3 to 19.8lb, factory default
settings: 6.6 to 8.8lb, it will decrease gradually when
adjusting the Screw(C) by clockwise rotation, vice versa.
Place your hand on forearm
and push it hard downwards.
Pro
X 1
Laptop Plate
X 1
VESA Connector
X 6
Screws(M4)
X 6
Screws(M5)
X 1
Base Stem
X 1
Rear Arm
X 1
Forearm
Note: Once you feel the damping of
screw increases or cannot be
rotated, please stop it, avoid of
damaging the mount.
TENSION ADJUSTMENT
WEIGHT ADJUSTMENT
ADJUST SPRING ARM AT
VERTICAL DIRECTION
6MM
5MM
5MM
INSTALLATION HARDWARE
ARM ADJUSTMENTS
WARRANTY SERVICE
FEEDBACK
Never worried when you choose viozon products
We offer the best after-sale service to our customer,
it only takes few minutes.
And then you will get complete service such as installation
guide, technical support, new product reminder, privilege of
purchasing similar products, promotions and warranty service
from Viozon.
Viozon is focusing on high-standard products, we believe
that customers’ feedback drives us upgrading products.
Writing a review which sharing your experience will help
other customers. Also, your review will give us great
encouragement and confidence for future improvement. If
you have any questions, please feel free to contact us
without hesitation.
Share it?
Let us know with a customer review.
Just send you name and order number to
FOR HELP PLEASE CONTACT US:
:
Viozon
www.vio-zon.com
Scan QR code
to get install video
