VINTAGE KING AUDIO
R A C K 5 0 0 W O O D P A N E L I N S T A L L A T I O N
WE’VE MADE IT EASY
Here are the instructions for installing your new wood side panels. If you follow each step, it should
take about 15 minutes — just be sure to separate the screws and it’ll be a cinch. We’ve worked hard
to make the instructions as helpful as possible, but should you have questions at any step along the
way, we’re here to help at [email protected].
If you’re ready, let’s get started.
BEFORE YOU START
Unplug your Vintage King Rack 500 from the power source (VERY IMPORTANT). If you have
modules installed, remove them and unplug all audio connections to the rear panel.
Tools required
• #1 Phillips-head screwdriver
• #2 Phillips-head screwdriver
Note: Do NOT use a powered screwdriver! You will risk damaging the screws or rack.
