Mounting the Speaker
•
Remove the grille to expose the mounting screws.
•
Be sure the mounting tabs are turned in, allowing the speaker to fit
into the hole. Then insert the speaker into the mounting hole.
•
Use the four screws to tighten the mounting tabs to the wall or ceiling.
•
Replace the grille.
•
To remove the speaker from the wall or ceiling, loosen the screws only
far enough to remove the speaker. This will prevent loss of the
mounting tabs.
-4-
www.vinsonacoustics.com
VA IC65
6 ½ 2-Way In-Ceiling Speaker
www.vinsonacoustics.com
