Vinotemp Wine-Mate WM-32520HZD, Installation, Use & Care Manual, Page: 7 / 27

- 6 -
2. VINO1520~2520HZD cabinet installation
•
Cut a rectangular inside opening with the 1/4” clearance inwards to the width
and height of the cooling unit. By not going through, leave 1/2” lip inside at the
wall to place the gaskets (see Fig 2.1).
•
If top exhaust installation, cut another rectangular opening at the top of the
cabinet to the length and width of the top exhaust.
•
Install 2 pieces of 1/4” ID wood thread inserts at the ceiling (see Fig.2.1 & 2.2).
•
Place the gaskets (1/2” foam tape) on the mounting lip sides (see Fig 2.3).
•
If top exhaust installation, place another gaskets along the top exhaust at the
top of the cooling unit (see Fig.2.4).
•
Move the cooling unit towards the mounting sides and push to press the
gaskets (see Fig 2.5).
•
Use 2 brackets and ¼” screws with 7/16” wrench to secure the cooling unit
(see Fig 2.6).
•
Install the cabinet grille on the cabinet exterior wall (see Fig. 2.7).
•
Plug the cooling unit in the cabinet receptacle.
•
Plug the wine cabinet.
Fig. 2.1 CABINET CUTOUT & GASKET LIP