42
A100K11194
Turbine Station Configuration Guide
6.10
Configure 3
rd
-party SIP Devices
Up to 10 3
rd
-party SIP devices such as SIP phones, SIP Speakers, Soft Phones can be registered
to an IC-EDGE System. Each SIP device requires that a SIP User account is defined on the Edge
Controller.
6.10.1 Install License
Before adding a 3
rd
-party SIP account to the IC-EDGE system, you need to obtain a license key. For
each SIP device used in the system, there must be a valid SIP license installed.
To install a license:
● Select
Edge Controller
>
Licensing
● Enter the license key in the
New License
field and click
ACTIVATE LICENSE
The
Licensing
table should now show all the licenses that are available.
6.10.2 Create SIP Account
● Select
Edge Controller
>
System Configuration
>
Directory
● Under
Manually Added Devices
select
3rd party SIP
from the dropdown list
● Modify
Number
and
Name
as required (a default Number and Name will be inserted which
you can modify)
● Optionally one can add a
SIP Password
. If a password is entered, one has to also manually
set the same password in the SIP device it self.
● Click
SAVE
to store the settings of the new SIP device in the Edge Controller.
Summary of Contents for ECPIR-3P
Page 1: ...TECHNICAL MANUAL Turbine IP Intercoms TCIS TCIV TFIE TFIX TMIS ECPIR 3P A100K11194 PRE 14 0029...
Page 22: ...22 A100K11194 Turbine Station Configuration Guide 3 6 Turbine Relay Module TA 10...
Page 77: ...77 Turbine Station Configuration Guide A100K11194 A 6 Front Board Front A 7 Front Board Rear...
Page 79: ...79 Turbine Station Configuration Guide A100K11194...
