flowSCREW 4w
packages
Copyright Vincotech
Handling Instruction
03
rem. sect. 5.2; mod. at sect. 5.1 29.09.2014
Gyimóthy Zs.
Gyetvai T.
FSWB-M-*-HI
Page
17 /
18
02
remove section 6.2
14.05.2014
Gyimóthy Zs.
Gyetvai T.
01
20.02.2014
Gyimóthy Zs.
Gyetvai T.
Ver.
Alteration
Date
Des. / Mod.
Appr.
10 Recommendation for soldering
Figure 16: Plated through hole, well soldered
Plated through holes should exhibit a vertical solder fill of 100%, with a fully formed fillet on the
solder side and evidence of 100% wetting on the component side lead, barrel and pad.
10.1 Wave soldering modules with solder pins
Figure 17: Typical profile for wave soldering
Some but not all modules with press-fit pins may also be wave-soldered.
