30
Vincent
BUTTONS OF THE REMOTE CONTROL
14
12
13
16
17
12. MUTE
Pressing this button once mutes the sound of the
loudspeakers (6) and the preamplifier outputs “PRE
OUTPUT” (9). Pressing it again returns to the origi-
nal volume.
13. DIMMER:
Brightness setting for the display
The brightness of the front panel display (2) can be
reduced in two steps using this button. If you press
it repeatedly, the third actuation switches off the
display.
14. Input Selector Buttons
These buttons are used to select one of the stereo
audio devices connected to the amplifier’s source
inputs for playback.
15. GAIN
With the activation of this function, the output
signal for the power amplifiers (9) and speakers
(6) is reduced by 8 dB and thus the volume of the
attached speakers. It should only be activated if
even at low volume settings the volume is already
very high.
16. BAL L and BAL R: Balance Control
Both keys can be used for changing the volume dif-
ference between right and left speaker if that is
desired.
17. VOLUME
/
: Volume keys
These buttons change the amplifier’s volume set-
ting for loudspeakers 6) and the preamplifier out-
puts “PRE OUTPUT” (9).
15
16
17
