7602116
7) ASSEMBLING THE PLATFORM
a)
Remove the top plate from the platform by undoing the
relative screws.
b)
Make sure that the two platform supports, fixed by a
wedge and a plastic clamp, are in the assembly position
(Fig. 27/a/b).
c)
Fit the platform, keeping it vertical and turning it through
90° as shown in (Fig. 28).
d)
Fix the platform to the frame using the relative M8 flathead
screws (Fig. 28/a).
e)
Plug in the connector j4 (Fig. 26 bis).
f)
Connect the lateral guard board operating cables to the
relative bar actuators, passing them around the pin (Fig.30/
a).
If the guards are not opened or closed correctly, adjust to the
specified position using the register fork (Fig.30/b).
g)
Replace the top plate on the platform using the relative
fixing screws.
h)
Remove the wedge and the plastic clamp (Fig. 27/c/d)
used to keep the platform horizontal during the adjustments
from the platform supports.
FIG.27
FIG.28
FIG.29
FIG.26 bis
i)
Tighten with a driving torque of 4 daN ± 0,1the dowel, the
nut and the locknut (Fig. 29/d,e,f).
l)
Plug in the connectors J1A, J1B, J1C, J1D (Fig. 29 bis).
23
c
b
a
c
a
e d
f
b
a
d
Summary of Contents for V64-74 B.I.
