Page 5
shading solutions by
VIMCO
TM
ATTACHING MDU TO MOUNTING BRACKET
B.
Attach the MDU to the mounting bracket using three
(3) truss-head screws.
HANGING THE SHADE
A.
Unwrap approximately 6 in. (150 mm) of material.
B.
Attach the shade to the MDU first by engaging the roller’s hexagonal socket with the motor’s hexagonal drive ball. You
may need to rotate the roller in order to push the shade over the hexagonal drive ball.
C.
Insert the idler pin into the slot of the idler support and drop it into place. Make sure the idler support is fully open.
C
B
Idler Support Mounting
Bracket
Idler Pin
CAUTION!
Sivoia
®
High Torque Roller Shades can weigh up to 225 lbs. (102 kg), depending on the size and
fabric type. For safety purposes, make sure at least two (2) individuals/installers are present when hanging
the shade.
3
4
