VIKING S26W
user manual:
BONA SPES s.r.o.
MADE IN CHINA
VIKING products are distributed and serviced by: BONA SPES s.r.o.
Řepčín 250, Olomouc 77900, Czechia
VAT No.: 3476774, +420 777 109 009, www.best-power.cz, [email protected]
QR VIKING S26W
user manual
CZ/EN/DE/HU
iPad
game
camera
phone
MP3/MP4
Support charging of the
following devices (support
charging of most USB devices)
■
Push-bu�on Func�on:
(01)Shortly press the power switch to show the power status
The four LED power indicators indicate the ba�ery status:
(02)LED light on/off opera�on method:
Firstly, long press the power switch bu�on to turn on the LED ligh�ng (illumina�on mode); click the switch bu�on again to dim
the brightness of the LED lamp (atmosphere mode); click the switch bu�on again, the three fast and three slow flashing
of the LED lamp, that is SOS rescue signal mode; click the power switch bu�on again, the LED lamp turns on the explosion and
flash warning func�on; that is the danger warning mode; and finally click the switch bu�on to turn off the LED lamp. Pressing
the power bu�on for a long �me in any mode will turn off the func�on of the LED lamp.
■
LED Light:
The solar power bank adopts a unique LED lamp design, and 18 LED lamp are distributed to make the light more uniform. The lamp power is 3W, 198 lumens, which is equivalent to the brightness of 25W
incandescent lamp.The design has 2 levels of illumina�on brightness adjustment to meet the needs of mul�-environment close-range ligh�ng. In the case that the power supply is fully charged, it can
con�nuously work for 32 hours in the highlight mode, 65 hours in the so� mode, and also has the SOS interna�onal distress signal and the flash warning func�on mode.Widely used in outdoor camping,
outdoor
adventure, car repair, maintenance, machine tools, warehouses, machine rooms, construc�on, daily emergency and other occasions.
■
How to charge the solar charger S26w:
(01)Charge it with an adapter or computer USB. Connect the USB cable to the power adapter or the computer's USB port, and then insert the Micro USB into the Micro-seat port of the solar power
bank. And the current power indicator of the solar power bank will be flashing. A�er the ba�ery is fully charged, the 4 LED power indicator lights are always on. The �me to fully charge is dependent on
the charging current.
Precau�ons:
Please stop using the item immediately, If you find the ba�ery has bulging, leakage or other undesirable phenomena during use
.
(02)Charging other devices by wireless charging. If your device has wireless charging func�on, put the mobile phone with
wireless charging func�on in the sensing area of the wireless charging board, press the power switch, the power indicator lights
up, and the wireless charging indicator lights up red. And it is indica�ng that the phone is charging.For your safe use, this
product has foreign body detec�on func�on. When there are metal impuri�es in the induc�on area between the mobile phone
and the wireless transmi�er board, the wireless charging indicator flashes red light to alarm. It can not be charged when it
enters the protec�ve state, and the metal foreign body needs to be removed before it can be charged normally.
Note:
If your
phone does not have the wireless charging func�on, you can’t use this item to charger by wireless charging before equip your
mobile phone with a suitable wireless receiver in the regular store.
■
Precau�ons:
1. Please fully charge it via the outlet at first-�me use to fully ac�vate this solar panel.
2. Please use accessories or correct specifica�ons of wire to charge the solar power bank, or it may be damaged.
3. Before charging your device, please confirm that the device input voltage matches the solar power bank output voltage.
4. It is strictly forbidden to beat, impact, disassemble or a�empt to repair this product by yourself.
5. Don’t put the solar power bank in a damp place or water .
6. Don't leave it in the heat of the sun or put it on the heat in flammable places.
7. Don't leave the product in the car. The high temperature of sunlight will damage it.
8. Keep the solar power bank out of the reach of children and avoid inappropriate use by children.
9.Don't put any foreign body into the USB input and output hole, in order to avoid short circuit or damage.
10. In order to avoid shortening the service life, please charge the solar power bank completely at least once every four months.
(02)Use the sun to charge the solar charger S26W.
Place the solar panel in the direc�on of ver�cal sunlight (please avoid high temperature which will damage the ba�ery), or
in a strong enough light environment, it can be charged via sunlight without any bu�on opera�on, and the indicator light is solid
green. A�er the ba�ery is fully charged, the four LED power indicator lights are always on.
■
Charging other devices with S26W:
(01)Charging other Devices with USB Port. The product has 2 USB and 1 Type-C output port. Connect any output port to the
digital device to charge the digital device. The LED power indicator lights up and the digital device is charged. Built-in intelligent
protec�on system, it will auto-stop chargeing when the devices are fully charged.
Note:
When the power of the mobile power
supply is low, the power supply output can not be carried out.
3
■
■
■
1. USB output(1)
2. USB output(2)
3. USB-C in/output
4. Micro input
5. Waterproof cover
6. Solar panel
7. Solar charging indicator
8. Ba�ery indicators
9. ON/OFF
10. Camping light
11. Lanyard hole
12. Camping light heat sink
13. Wireless charging
14. Wireless charging indicator
Ba�ery type: Li-polymer ba�ery
Solar panel specifica�ons: 150.8x71.3mm (300mA)
Temperature for use: -5°C~+50°C
Full charging �me: 13-26 hours(Depends on adaptor power)
USB Output(2): 5.0V/3.1A
Input (Type-c) : 5.0V/2.0A
Input (Micro) : 5.0V/2.0A
USB Output(1):5.0V/3.lA
Output(Type-c): 5.0V/3.1A
Wireless charging: 5W (5V.0/1.0A)
Size: 176×95×29MM
Weigh: ±564G
Receiving Distance: <8MM
Working frequency: 110-250KHz
Power Conversion: > 72%
0%